About This Article
Written by: Apex Brain & Hearing Health Editorial Team
Developed using reputable medical literature, clinical guidance, and trusted health organizations whenever appropriate.
Affiliate Disclosure: Apex Brain & Hearing Health may earn a commission if you purchase through links on this page, at no additional cost to you. As an Amazon Associate, we earn from qualifying purchases. Learn more.
To understand your hearing test results, start with the audiogram. This chart shows the softest sounds you can hear at different pitches, measured separately for your right and left ears. The symbols reveal which frequencies are affected, while their positions show how loud a sound must be before you can detect it.
Hearing test results may also include speech recognition scores, middle-ear measurements, and other findings. Together, these help an audiologist determine whether hearing loss is present, describe its type and degree, and recommend appropriate next steps.
You can learn to recognize the main features of your hearing test results, but an audiogram alone cannot establish the exact medical cause of hearing loss or determine every treatment decision.
How to Read Your Hearing Test Results in 5 Steps
If you have an audiogram in front of you, begin with these five steps:
- Find the frequencies along the horizontal axis.
- Read the hearing levels in decibels hearing level (dB HL) along the vertical axis.
- Identify the symbols representing your right and left ears.
- Look at the thresholds and patterns across frequencies.
- Review speech-test results and any additional findings with your audiologist.
These steps provide a useful starting point without requiring you to interpret every clinical measurement independently.
What Is an Audiogram?
An audiogram is a graph displaying the results of pure-tone hearing testing.
It shows the lowest sound levels a person can reliably detect at selected frequencies.
Each plotted result is called a hearing threshold.
The audiogram can help describe:
- Which frequencies are affected by hearing loss.
- Whether hearing differs between the ears.
- The degree and configuration of hearing loss.
- Whether air- and bone-conduction findings suggest a conductive component.
- Changes in hearing compared with previous testing.
An audiogram measures hearing sensitivity. It does not fully explain how well someone understands conversations in every environment.
Step 1: Understand Frequency on the Horizontal Axis
The horizontal axis of an audiogram represents sound frequency, measured in hertz (Hz).
Frequency describes pitch.
Lower frequencies appear toward the left side of the chart, while higher frequencies appear toward the right.
Commonly tested frequencies include:
- 250 Hz: Low-pitched sounds.
- 500 Hz: Lower-frequency sounds important for speech and environmental hearing.
- 1000 Hz: A middle-frequency test point.
- 2000 Hz: An important frequency for speech information.
- 4000 Hz: A higher frequency often affected by noise-related hearing loss.
- 8000 Hz: A high-frequency test point.
The exact frequencies tested depend on the purpose of the examination.
High-frequency hearing loss may make certain consonants harder to detect, while low-frequency hearing loss may affect the fullness or audibility of deeper sounds.
However, speech understanding depends on information distributed across multiple frequencies.
Step 2: Understand Hearing Level on the Vertical Axis
The vertical axis shows hearing level in decibels hearing level (dB HL).
This is a clinical scale used to describe hearing thresholds relative to standardized reference levels.
On a conventional audiogram:
- Values near the top represent softer sounds.
- Values farther down represent louder sounds.
- A threshold of 10 dB HL means the tone was detected at a softer level than a threshold of 50 dB HL.
The lower a threshold is plotted on a conventional audiogram, the louder the sound needed to be before it was heard.
For example, if you have a threshold of 15 dB HL at 1000 Hz and 50 dB HL at 4000 Hz, your hearing is less sensitive at 4000 Hz.
Is dB HL the Same as Everyday Sound Loudness?
No.
Decibels hearing level (dB HL) are used for clinical hearing thresholds.
Environmental sound levels are commonly reported using decibels sound pressure level (dB SPL) or A-weighted decibels (dBA).
These scales serve different purposes and should not be treated as directly interchangeable.
For example, you cannot directly compare a threshold of 40 dB HL on an audiogram with an environmental sound measured at 40 dBA without considering their different reference systems.
Step 3: Identify the Right- and Left-Ear Symbols
Audiograms use standardized symbols to identify which ear was tested and how sound was presented.
Air-Conduction Symbols
Common unmasked air-conduction symbols are:
- O: Right ear, often shown in red.
- X: Left ear, often shown in blue.
The results for both ears may appear on the same graph or on separate charts.
The position of a symbol along the horizontal axis indicates frequency, not which ear it represents.
An O on the left side of the graph is still a right-ear result if it is being used according to standard notation.
Bone-Conduction Symbols
Common unmasked bone-conduction notation includes:
- <: Right-side bone-conduction oscillator placement.
- >: Left-side bone-conduction oscillator placement.
Bone-conducted sound can stimulate both cochleae, so an unmasked response is not necessarily ear-specific.
Different bracket symbols are used for masked bone-conduction measurements. Masking helps an audiologist obtain more reliable ear-specific information when necessary.
Other symbols may indicate masked air conduction, sound-field testing, or a level at which no response was obtained.
Because notation varies according to testing conditions, ask your audiologist to explain the symbol key on your particular chart.
Step 4: Understand the Degree of Hearing Loss
Audiologists describe hearing loss using degree or severity categories based on hearing thresholds.
One commonly used classification system published by the American Speech-Language-Hearing Association (ASHA) includes:
| Degree | Hearing threshold |
|---|---|
| Normal | -10 to 15 dB HL |
| Slight | 16 to 25 dB HL |
| Mild | 26 to 40 dB HL |
| Moderate | 41 to 55 dB HL |
| Moderately severe | 56 to 70 dB HL |
| Severe | 71 to 90 dB HL |
| Profound | 91 dB HL or greater |
These categories represent one commonly used system. Other organizations and clinicians may use different boundaries, particularly for children.
The classification applied to a person may depend on which frequencies are averaged and the purpose of the assessment.
Someone can have normal thresholds at certain frequencies and severe hearing loss at others. A single severity label does not capture every aspect of the audiogram.
What Does Mild Hearing Loss Mean?
Mild hearing loss may make soft speech, distant voices, and certain speech sounds harder to detect.
Some individuals notice greater difficulty when background noise is present.
Learn more about mild hearing loss symptoms.
What Does Moderate Hearing Loss Mean?
Moderate hearing loss may interfere with understanding ordinary conversational speech, particularly without appropriate amplification or other communication support.
For practical examples, see moderate hearing loss symptoms.
What Does Severe Hearing Loss Mean?
Severe hearing loss can make ordinary speech difficult to detect or understand without significant support.
Individual communication outcomes vary according to speech recognition, frequency configuration, hearing technology, and other factors.
Read more about severe hearing loss symptoms.
Step 5: Look at the Shape of Your Audiogram
The configuration of hearing loss describes how thresholds change across frequencies.
Several recognizable patterns may appear.
High-Frequency Hearing Loss
High-frequency hearing loss means thresholds are poorer at higher frequencies.
On a conventional audiogram, the plotted line commonly slopes downward toward the right.
This pattern is frequently associated with aging and certain types of noise exposure.
However, the shape alone does not establish the cause.
Low-Frequency or Reverse-Slope Hearing Loss
Low-frequency hearing loss affects lower-pitched sounds more than higher-pitched sounds.
A reverse-slope configuration rises toward the right side of a conventional audiogram, indicating better hearing at higher frequencies.
Possible causes include certain inherited conditions, some middle-ear disorders, and inner-ear conditions such as Ménière’s disease.
Flat Hearing Loss
A flat audiogram configuration shows relatively similar hearing thresholds across much of the tested frequency range.
The degree of hearing loss may still be mild, moderate, or more severe.
Notched Hearing Loss
A notch is a relatively localized region of poorer thresholds.
Noise-induced hearing loss often produces a notch in the higher frequencies, commonly around 3000, 4000, or 6000 Hz.
A low-frequency notch is not the classic pattern of noise-induced hearing loss.
Notches are not unique to noise exposure and must be interpreted with the person’s history and other clinical findings.
What Is the Speech Banana on an Audiogram?
Some educational audiograms include a shaded or outlined region called the speech banana.
It illustrates approximate frequency and level ranges occupied by various speech sounds.
The display can help explain why hearing loss at particular frequencies may affect access to speech information.
However, the speech banana is a teaching aid, not a diagnostic test or an exact prediction of someone’s speech understanding.
The original speech recording level, the speaker, distance, background noise, and other factors affect which speech sounds are audible.
An audiologist interprets actual hearing and speech-test results rather than relying on the speech banana alone.
How Do Air- and Bone-Conduction Results Identify Hearing-Loss Type?
Air-conduction and bone-conduction testing provide different information.
Air-conduction testing presents sound through the usual outer-, middle-, and inner-ear pathway.
Bone-conduction testing uses skull vibration to stimulate the cochlea while largely bypassing the outer and middle ear.
Comparing these measurements helps characterize hearing loss.
Conductive Hearing Loss
Conductive hearing loss occurs when sound transmission through the outer or middle ear is reduced.
Air-conduction thresholds are typically poorer than bone-conduction thresholds, creating a clinically meaningful air-bone gap.
Possible causes include impacted earwax, middle-ear fluid, and selected eardrum or middle-ear bone conditions.
Sensorineural Hearing Loss
Sensorineural hearing loss involves the cochlea or auditory nerve.
Air- and bone-conduction thresholds are generally both reduced without a significant air-bone gap.
Many forms are permanent, although prognosis depends on the underlying cause.
Mixed Hearing Loss
Mixed hearing loss includes both conductive and sensorineural components.
Bone-conduction thresholds are reduced, and air-conduction thresholds are additionally poorer by a clinically meaningful amount.
The exact medical cause may require further evaluation.
What Is an Air-Bone Gap?
An air-bone gap is the difference between air- and bone-conduction thresholds at the same frequency.
For example, if an air-conduction threshold is 50 dB HL and a reliable bone-conduction threshold is 25 dB HL at the same frequency, the air-bone gap is 25 dB.
A meaningful gap may indicate a conductive component.
However, the audiologist considers masking, test reliability, frequency, equipment, and other findings before interpreting the difference.
For further explanation, visit What Is Bone Conduction Testing?
What Do Speech Reception Threshold and Word Recognition Scores Mean?
Not all hearing test results appear on the pure-tone audiogram.
Many audiologic evaluations also include speech measures that provide additional information about communication.
Speech Reception Threshold (SRT)
A speech reception threshold is commonly the lowest presentation level at which a person can correctly recognize approximately 50% of familiar, standardized speech materials such as spondaic words.
It is often reported in dB HL.
An audiologist may compare the SRT with pure-tone findings to evaluate consistency and better understand speech audibility.
The SRT is not a percentage score describing how well someone understands ordinary conversation.
Word Recognition Score (WRS)
Word recognition testing measures how accurately a person recognizes or repeats a set of spoken words under controlled conditions.
Results are commonly reported as a percentage.
For example, a result of 80% means that 80% of the test words were recognized correctly under the specified testing conditions.
That does not mean the person understands exactly 80% of everyday conversation.
Results depend on several factors, including:
- Presentation level.
- Speech materials and language.
- Test conditions.
- Hearing sensitivity.
- Other auditory or cognitive factors.
Audiologists interpret speech scores alongside hearing thresholds and other clinical information.
Learn more in What Is a Word Recognition Test?
What Do Speech-in-Noise Test Results Mean?
Some people hear relatively well in quiet environments but struggle when several people speak at once.
Speech-in-noise testing evaluates how accurately someone recognizes speech when competing sounds are present.
Some tests report the relationship between speech and background noise as a signal-to-noise ratio (SNR).
For example, the Quick Speech-in-Noise test (QuickSIN) estimates SNR loss, which describes how much more favorable the speech-to-noise relationship must be compared with a reference performance level.
Different speech-in-noise tests use different scoring systems and normative data.
A score should not be interpreted without knowing which test was administered.
A poor score does not independently establish auditory processing disorder, cochlear synaptopathy, or any other specific diagnosis.
Read What Is a Speech-in-Noise Test? for more information about these measurements.
What Do Tympanometry and Acoustic Reflex Results Tell You?
Some hearing evaluations include tests assessing middle-ear function and auditory reflex pathways.
Tympanometry
Tympanometry measures how the eardrum and middle-ear system respond when air pressure changes.
Results are often displayed on a tympanogram rather than on the pure-tone audiogram.
Clinicians may describe tympanometric patterns using categories such as Type A, Type B, or Type C.
These classifications can provide information about middle-ear mobility and pressure, but they do not establish a specific medical diagnosis without other findings.
Acoustic Reflex Testing
Acoustic reflex testing evaluates changes associated with contraction of a middle-ear muscle in response to sufficiently intense sound.
It may provide useful information about middle-ear function and portions of the auditory reflex pathway.
Not every hearing evaluation requires this procedure.
For more detail, read What Is Acoustic Reflex Testing?
What if Your Hearing Is Different in Each Ear?
Hearing test results are measured separately for each ear, allowing an audiologist to identify differences between them.
When the difference is clinically meaningful, it may be described as asymmetric or asymmetrical hearing loss.
Asymmetry can involve hearing thresholds, speech recognition, or both.
Some differences are longstanding or have an identifiable explanation, while others require additional medical evaluation.
For example, unexplained asymmetric sensorineural hearing loss may warrant assessment by an ear, nose, and throat (ENT) physician and, in selected circumstances, imaging.
Learn more about asymmetrical hearing loss, its causes, symptoms, and treatment options.
Can Your Audiogram Show Why You Have Hearing Loss?
An audiogram can suggest the type, degree, and configuration of hearing loss, but it does not always establish the medical cause.
For example, high-frequency sensorineural hearing loss may be associated with aging, noise exposure, medication effects, genetic factors, or other conditions.
Likewise, a conductive pattern may occur with different outer- or middle-ear disorders.
Your audiologist may consider:
- Medical and hearing history.
- Otoscopy and middle-ear findings.
- Speech recognition results.
- Previous hearing tests.
- Medication and noise-exposure history.
- Other symptoms, including tinnitus or dizziness.
- Specialized testing or medical referral when appropriate.
The goal is to understand the complete clinical picture rather than guess a diagnosis from the audiogram’s shape.
How Do You Compare Your Current Results With an Earlier Hearing Test?
Previous audiograms can help an audiologist determine whether hearing thresholds have changed.
The clinician compares results at corresponding frequencies, evaluates differences between ears, and considers test reliability.
Small threshold differences may reflect normal test-retest variability or temporary testing conditions.
A meaningful change may require confirmation, additional testing, or medical evaluation.
Some types of hearing loss develop gradually enough that people do not immediately recognize their symptoms.
For additional context, read Why Does Hearing Loss Develop So Gradually?
What Should You Do After Receiving Your Hearing Test Results?
The next step depends on what the evaluation shows and how hearing difficulties affect daily life.
Possible recommendations include:
- Monitoring hearing over time.
- Medical assessment for a treatable ear condition.
- Hearing aids when clinically appropriate.
- Assistive listening devices or communication accommodations.
- Additional speech or auditory testing.
- Referral for specialist evaluation when indicated.
- Hearing protection and noise-exposure reduction.
Hearing technology may improve access to sounds and speech, but it does not guarantee normal hearing or prevent every future change.
Questions to Ask Your Audiologist
- Do my thresholds show hearing loss, and which frequencies are affected?
- Is my hearing loss conductive, sensorineural, or mixed?
- Are my right- and left-ear results significantly different?
- What do my speech recognition scores mean?
- Would speech-in-noise testing help explain my everyday difficulties?
- Do any findings require medical follow-up?
- Would hearing aids or another device be appropriate?
- How should my hearing be monitored?
Ask for a copy of your results and the clinician’s explanation of any measurements you do not understand.
When Are Hearing Test Results an Urgent Concern?
Sudden unexplained hearing loss requires immediate medical evaluation.
If hearing drops rapidly over hours or a few days, do not wait for a routine follow-up appointment or assume the cause is earwax or congestion.
Sudden sensorineural hearing loss can require time-sensitive treatment.
If a sudden hearing change occurs with facial weakness, difficulty speaking, new neurological symptoms, or other signs of possible stroke, call 911.
Persistent ear drainage, significant pain, or rapidly changing symptoms also deserve appropriate medical assessment.
Frequently Asked Questions
What Does 40 dB HL Mean on a Hearing Test?
A hearing threshold of 40 dB HL means the person needed a sound at that hearing level to detect the tested frequency reliably. It falls within the mild hearing-loss range of one commonly used classification system. The interpretation depends on the other frequencies and complete test results.
What Does a Straight Line on an Audiogram Mean?
A relatively flat line means hearing thresholds are similar across the tested frequencies. It does not necessarily mean hearing is normal. A flat line near 10 dB HL differs substantially from one near 60 dB HL.
Does a Lower Line Mean Worse Hearing?
On a conventional audiogram, symbols plotted farther down indicate that louder tones were needed for detection. However, the audiologist interprets the full pattern rather than one isolated point.
Can You Have Hearing Problems With a Normal Audiogram?
Yes. Some people report difficulty understanding speech in noise, tinnitus, or other auditory problems despite conventional pure-tone thresholds within a normal range. Additional assessment may be appropriate.
Is One Ear Supposed to Be Better Than the Other?
Small differences can occur, but significant unexplained asymmetry may require further assessment. The audiologist considers the size, frequency pattern, symptoms, and other findings.
Can Hearing Test Results Improve?
Sometimes. Certain conductive conditions and selected sensorineural conditions may improve with appropriate treatment or spontaneously. Many established forms of sensorineural hearing loss are permanent.
Does a Poor Word Recognition Score Mean I Need a Cochlear Implant?
Not automatically. Cochlear implant candidacy depends on several factors, including hearing thresholds, speech-recognition performance, benefit from appropriately fitted hearing aids, medical suitability, age, and applicable criteria.
How Often Should I Have Another Hearing Test?
The appropriate schedule depends on your hearing status, symptoms, occupational or recreational noise exposure, medical history, and clinician’s recommendations. There is no single interval suitable for everyone.
The Bottom Line
Understanding your hearing test results begins with knowing how to read the audiogram.
Frequency runs from low to high across the horizontal axis, while hearing level in dB HL is displayed vertically. Right- and left-ear symbols identify the thresholds obtained for each ear.
The shape and position of those thresholds help describe the degree and configuration of hearing loss. Air- and bone-conduction results help identify conductive and sensorineural components.
Speech recognition, speech-in-noise testing, middle-ear measurements, symptoms, and medical history provide additional information that an audiogram alone cannot supply.
The most useful next step is to review your complete results with an audiologist, understand any recommended medical evaluation, and choose care based on your individual hearing and communication needs.
Sources and Further Reading
- ASHA: Type, Degree, and Configuration of Hearing Loss — Hearing-loss classifications and audiogram patterns.
- ASHA: Audiometric Symbols — Standard notation for air conduction, bone conduction, masking, and test conditions.
- ASHA: Hearing Loss in Adults — Audiologic evaluation and interpretation.
- NIDCD: Hearing Aids — How hearing devices work and their limitations.
- NIDCD: Sudden Deafness — When sudden hearing changes require immediate medical care.
Medical Disclaimer
Apex Brain & Hearing Health provides educational information only. Our content is not a substitute for professional medical advice, diagnosis, or treatment.
Always seek the advice of a qualified healthcare professional with questions about a medical condition, symptoms, treatment options, or changes to your health.